UOS Macro - Fletcher + Saw Quests Combined
UOS Macro - Fletcher + Saw Quests Combined
Original version: https://pastebin.com/raw/ZfMCsfcC
Upgraded version 3/27/21: https://pastebin.com/raw/jLxv21uG
Upgraded version 3/27/21: https://pastebin.com/raw/jLxv21uG
Last edited by MB on February 2nd, 2022, 5:20 am, edited 16 times in total.
Vampire337, Crasheris and Supercreep like this.
Top
Re: UOS Macro - Fletcher + Saw Quests Combined
So am i mistaken or does this macro prioritize fletching over carpentry turn ins, do you have one that is the opposite prioritizing carpentry over fletching? the reason i ask is because i almost never seem to get saws compared to the amount of fletching kits i get with This macro, other than that the macro is a masterwork
Re: UOS Macro - Fletcher + Saw Quests Combined
There are 5 quests to do fletching vs 1 that does carpentry. Quests come available (rand 1-5)*30 sec. It's set up to check the Saw quest on every 30 second mark to optimize saws.
Re: UOS Macro - Fletcher + Saw Quests Combined
oh i didnt know, thanks for the info!
Re: UOS Macro - Fletcher + Saw Quests Combined
Am I doing something wrong? I've gotten about 30-40 saws since starting this macro but haven't gotten a single Fletching kit.
Re: UOS Macro - Fletcher + Saw Quests Combined
YES, propably are you doing some WRONG!!!
Re: UOS Macro - Fletcher + Saw Quests Combined
That was of 0 help. Thank you, MMMartin.
Anyone know what is going on? I made sure the Serial number is correct for the fletcher quest giver, but my macro isn't getting the quest from the giver. He runs over to the bower but then does nothing and just runs back to the carpentry quester. The saw quest is working perfectly, but for some reason the fletching portion is not working.
Anyone know what is going on? I made sure the Serial number is correct for the fletcher quest giver, but my macro isn't getting the quest from the giver. He runs over to the bower but then does nothing and just runs back to the carpentry quester. The saw quest is working perfectly, but for some reason the fletching portion is not working.
Re: UOS Macro - Fletcher + Saw Quests Combined
Probably need to cancel existing fetching quest
The Instigator likes this.
Top
Re: UOS Macro - Fletcher + Saw Quests Combined
I'm not sure what I changed the first time, but I just deleted the macro, cleared everything, and started over, now it's working!
Thank you for the support.
Thank you for the support.
-
- Posts: 68
Re: UOS Macro - Fletcher + Saw Quests Combined
sorry to be a bother. I haven't played UO in awhile and this is my first time using steam. I got the skills, beatle, resource container, and marked the runes. when I start the macro in heartwood it made all the tools it needed then got off the beetle and said movetype: source not found, counttype: source not found, useobject: source not found. do you know what I am doing wrong?
Re: UOS Macro - Fletcher + Saw Quests Combined
you need to set the container for the Fletcher drop offP-nut Galleryy wrote:sorry to be a bother. I haven't played UO in awhile and this is my first time using steam. I got the skills, beatle, resource container, and marked the runes. when I start the macro in heartwood it made all the tools it needed then got off the beetle and said movetype: source not found, counttype: source not found, useobject: source not found. do you know what I am doing wrong?
FletcherDropoff container needs bolts, ingots, boards in it
you also need to set the beetle and the runebook
you also need to set the woodhue, mage/chiv information and if your beetle is bonded or not
- Attachments
-
- Capture3.PNG (19.24 KiB) Viewed 137496 times
P-nut Galleryy likes this.
Top
-
- Posts: 68
Re: UOS Macro - Fletcher + Saw Quests Combined
Thanks. It seems to be working now.Sgfcat wrote:you need to set the container for the Fletcher drop offP-nut Galleryy wrote:sorry to be a bother. I haven't played UO in awhile and this is my first time using steam. I got the skills, beatle, resource container, and marked the runes. when I start the macro in heartwood it made all the tools it needed then got off the beetle and said movetype: source not found, counttype: source not found, useobject: source not found. do you know what I am doing wrong?
FletcherDropoff container needs bolts, ingots, boards in it
you also need to set the beetle and the runebook
you also need to set the woodhue, mage/chiv information and if your beetle is bonded or not
-
- Posts: 68
Re: UOS Macro - Fletcher + Saw Quests Combined
After it recalls home to load logs into the beetle it loads some into my bag as well, but it overloads me. How would I adjust that? I scanned through and couldn't pinpoint it myself.
-
- Posts: 68
Re: UOS Macro - Fletcher + Saw Quests Combined
I believe I located where I need to make the change around line 430ish (cannot remember exact line number it was at the moment), but I am not understanding what I am supposed to change there.
Re: UOS Macro - Fletcher + Saw Quests Combined
well your character should be human with as much strength as possible, preferably 125 strP-nut Galleryy wrote:After it recalls home to load logs into the beetle it loads some into my bag as well, but it overloads me. How would I adjust that? I scanned through and couldn't pinpoint it myself.
if your maximum weight is below 425
then add // to lines 477, 478 and 479 so it will look like this
//elseif weight < 425
//movetype 0x1bd7 'FletcherDropoff' 'backpack' (0 0 0) woodhue[] 100
//pause 1000
if your maximum weight is also below 375 then also add // on lines 473, 474 and 475 to look like this
//elseif weight < 375
// movetype 0x1bd7 'FletcherDropoff' 'backpack' (0 0 0) woodhue[] 150
//pause 1000
edit: just remember to remove those // from the lines as your maximum weight reaches those break points